 |
 |
||||||
|
LLee Filters Canada |
|||||||
|
|||||||
|
Holder Systems
Adaptor rings fit into the lens to accommodate the filter holder. Once the adaptor is in place the filter holder clips firmly to it using a smooth, quick-release, spring loaded mechanism. Sturdily constructed with an aluminium screw thread, the adaptors are available in both standard and wide-angle configurations. Special sizes can be made to order. The wide-angle adaptors are designed so that the filter is placed as close as possible to the front element of the camera lens, and should be used when vignetting is encountered with a standard adaptor ring.
Holders The foundation kit is the basic filter holder package, and clips easily onto the adaptor ring. It allows 1,2,3 or 4 filters to be attached to almost every lens on every format of camera.
For photographers who already own a foundation kit, the upgrade package takes the holder system to professional kit standard. The pack contains all the components needed to create a single filter holder with up to four sets of slots, together with a tandem adaptor that enables the holder to slot easily onto the front of the foundation kit allowing independent rotation.
The professional kit contains two basic filter holders that connect together via a tandem adaptor, allowing even more filters to be fitted in front of the lens. Each holder can then be individually turned to achieve independent rotation of grads and polarisers.
An ideal introduction to the comprehensive LEE Filters filter system, the new starter kit includes an assembled filter holder, a 0.6 ND grad, a cleaning cloth, and a Coral 3 grad with an extended coloured portion that can be used as both a graduate and an all over warm up. All packed in the new triple pouch, this is the best way to get started with using filters in your photography.
Starter Kit Box contents:
An ideal introduction to the comprehensive LEE Filters filter system for digital SLR users, this new kit includes an assembled filter holder, a 0.6 ND Hard Grad, a cleaning cloth, and a ProGlass 0.6ND Standard. These new glass ND filters are optimized for use with digital cameras, as they absorb more Infra Red and UV light than traditional ND filters and provide a more punchy result and less discolouration in adverse lighting conditions. All packed in the three filter triple pouch, this is an ideal way to get the best results with your digital SLR.
Starter Kit Box contents:
The perfect solution for ultra wide-angle, large and medium format photography, the push on filter holder is designed to fit directly onto lenses, and has an outside barrel diameter of 100mm. The holder attaches directly onto the lens itself and such close proximity allows the maximum possible angle of view without vignetting. Custom adaptor donuts are available to enable fixing to smaller lenses. The unit also has added advantage of using standard 100mm filters.
The RF75 Filter System has been designed to offer a high quality precision filter holder that is compact, lightweight and will fit to lenses with a diameter of 67mm or less. The holder is primarily offered to users of rangefinder and high end digital compact cameras, but will equally be of use for large and medium format users who require a smaller, more compact filter system. The RF75 System includes a full range of filters sized 75mm x 90mm. These filters are hand made to the same exacting quality standards of colour and optical flatness found in the renowned LEE 100mm System. In keeping with the smaller size, the filter graduation zones have been adjusted to suit the smaller system. These changes have been made through extensive testing and in conjunction with top landscape photographers.
RF75 Adapter Rings
RF75 Deluxe Set The RF75 Deluxe Set consists of a RF75 Filter Holder, RF75 Clip-on Polariser and three RF75 neutral density hard graduated filters (0.3ND, 0.6ND & 0.9ND), all you need to add is the appropriate adaptor rings to suit your lenses.
Holder of 100x100mm (4” x 4”) polyester or resin filters. Attaches
to lens with an Elastomeric Tensioning Device (heavy rubber band).
Fits lenses up to 82mm outside diameter.
©2004 TYI |
